Free Shipping In All Countries
Cart 0
s10S 36V 30A Battery Protection Board Li-ion Cell 18650 Battery Protection BMS Board With Balance Function

s10S 36V 30A Battery Protection Board Li-ion Cell 18650 Battery Protection BMS Board With Balance Function

Regular price $16.99 Sale price $24.99 Unit price per
Tax included. Shipping calculated at checkout.
10S 36V 30A Battery Protection Board Li-ion Cell 18650 Battery Protection BMS Board With Balance Function

Features:

  • The protection board is for 10 series cell Li-ion batteries, it can be used for 3.7V ternary batteries, manganese acid batteries and cobalt acid batteries.
  • It has balance function which would ensure each battery cell being fully charged at same time.
  • Support overcharge protection, over-discharge protection and short circuit protection. 
  • It is suitable for electric car, electric power assistant car, skateboard car, inverter, etc
  • With temperature control protection function, safe and reliable

 

Specifications:

Applicable voltage: 36V

Applicable power: <1000w

Maximum working current: 30A

Continuous maximum current: 20A

Overdischarge protection voltage: 2.6v
Overcharge protection voltage: 4.25v
Charging current: Maximum 10A
Balance voltage: 4.2v
High temperature discharge: 75 ℃

Low temperature charge: - 7 ℃

Weight: 46g

 

BMS Protection Board Wiring Steps
1. Firstly connect the batteries in series
2. Ensure that the voltage of each string is the same (the difference between the highest voltage and the lowest voltage is preferably within 0.1V), and the voltage range is between 3.2-4.0V.
3. Firstly connect the distributed cable, connect according to the diagram, and insert the cable port into the board port after checking it is correct (first connect the battery, then insert the board, the step cannot be reversed).
4. Check whether the total positive voltage of the C-port and P-port to the battery is equal to the total voltage of the battery. If they are equal, the board is working normally.
5. Solder the battery negative B- to the port marked B- on the board.
6. Both the battery output negative electrode and the charging negative electrode of the same port board are connected to the port marked C- on the board (the P- port is just floating).
7. Separate port (different port) board, the battery output negative pole is welded P-, and the charging negative pole is welded into the port marked C- on the board.

Note:

Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.

Picture Show:

GS05120-2GS05120-8GS05120-9GS05120-10GS05120-3GS05120-5GS05120-6GS05120-7

 

aeProduct.getSubject()

1) We accept Alipay, West Union, TT. All major credit cards are accepted through secure payment processor ESCROW.

2) Payment must be made within 3 days of order.

3) If you can't checkout immediately after auction close, please wait for a few minutes and retry Payments must be completed within 3 days.   

 


Type: Other
Origin: CN(Origin)
Model Number: 10S Board
is_customized: Yes
Material: Plastic
Usage: Commercial Manufacture
Product name: Battery Board
Type: Board
Item: Board with Balance
Applicable voltage: 36V
Max. working current: 30A
Continuous maximum current: 20A
Overdischarge voltage: 2.6v
Overcharge voltage: 4.25v
Charging current: 10A
Balance voltage: 4.2V


Share this Product