MPPT Solar Charge Controller 30A 40A 50A 60A for 12V 24V 36V 48V Lithium LiFePO4
Product Description :
MPPT Solar Charge Controller 30A 40A 50A 60A for 12V 24V 36V 48V Lead Acid Lithium LiFePO4 AGM Battery V118
And these areas will be free tax as below.
Austria, Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Luxembourg
Netherlands, Portugal, Spain, Sweden, Switzerland, United Kingdom, Bulgaria, Cyprus
Czech, Estonia, Croatia, Hungary, Lithuania, Latvia, Malta, Poland, Romania, Slovenia, Slovakia
2. If you choose ID, then the product will be shipped from Indonesia and there will be a local call support for Indonesia clients which will guide you install the controller step by step.
The output terminal is for lamp only ( 12V system less 60W, 24V/36V/48V system less 100W ),and it will be burnt if connecting to other loads. The output for battery is no polarity reverse protection.
V119 version with Wifi function coming soon.
1 MPPT solar controller
1 set of parts for shell mounted
There are some fake products on the market including Amazon, Ebay, Aliexpress and Alibaba. We'll not provide the warranty for counterfeit and it will be risk for your battery. Please see the details as below to help you find an original one.
1. The advanced application for V118 30A, 40A, 50A and 60A:
If you want to control a big current load such as 100A, you could use the OU terminals to control it as below pictures.
(Figure 1)：Using a relay to control a small current switch to achieve an inverter switching machine.
(Figure 2)：Use relay to control high current load input circuit-loop.
2. The advanced application for V118 50A and 60A:
If your load device is shorted or over-current, the controller will start output short-circuit protection to close the output condition. When you disconnect the load and press ENT over 5 seconds, then output will turn on again. Please note that 30A and 40A do not have this function.
3. The advanced application for V118 50A and 60A:
If your load device is shorted or over-current, the controller will have output short-circuit protection and close the output. When you disconnect the load and press ENT over 5 seconds, then output will turn on again. Please note the 30A and 40A don't have this function.
The MPPT output of the battery voltage will not rise suddenly, and the controller doesn't cause the output voltage to overshoot through the BMS protection board.
By the way, the charging voltage of V118 version can be set from 12V to 17V compare to the fake products is from 13.5V to 17V.
The discharge voltage can be set from 9.8V to 14V.
4. The advanced application for V118 30A, 40A, 50A and 60A:
The time and light control for OUTPUT will be accurate when you connect the lamp or other DC loads less 5A. The fake product can't use the time and light control and can't connect other DC load except the lamp.
Notes: The OUT+ and OUT- terminal connect for lamp only
( 12V battery system less 60W, 24V/36V/48V battery system less than 100W ),
The controller will be burnt if connected to other loads.
The output terminal of controller do not have polarity reverse protect function.
If your place is in remote area, there may be an extra cost.
Application: Charger Controller
Application: Solar System Controller
Application: Voltage Controller
Application: Solar Working Station
Model Number: V118
Maximum Current: 30A 40A 50A 60A
Brand Name: MakeSkyBlue
Case Material: Aluminum
Battery Type: Vented Sealed Gel NiCd LiFePO4 Lithium Battery
Cooling way: Fan
Humidity: 5% to 95% Relative Humidity
Operating Temperature: -20 - +55
Storage Temperature: -40 - +75
Net Weight: 1.1
Warranty: One year