Electronic Key AEG Merf 3.2 for AEG Guns Fuse LiPo LifePO4 LiIon NiCd M4 AK47
Product Description :
Electronic key MOSFET for AEG Guns Battery Protection Fuse LiPo LifePO4 LiIon NiCd M4 AK47
Multifunctional programmable 3rd generation MOSFET. The system has as much as 10 functions. Its latest feature is the 3rd Burst Mode, which allows for limiting the number of shots. The system allows for lossless rate of fire adjustment; it protects state- of- the art Li Ion batteries: LiPoly and LiFePO4; it has a built in active brake; and it protects contacts against damage. The Smart Trigger function enables achieving faster trigger response. Thanks to two operating modes, the system works with both the original and the modified AEG installation. The system is designed for all replicas and especially for the upgraded ones. It has been adapted to work even with the most powerful springs, including M170.
· Standard MOSFET function
· Active brake
· Over-voltage protection for Li-Poly/Li-Ion/LiFePO4/NiCd batteries
· Short-circuit protection
· Thermal protection
· Rate of fire adjustmen
· 3-rd Burst Mode
· Smart Trigger
· Operating modes:
· Plug&Play Mode is not necessary to modify original installation.
· Enhanced mode. Trigger contacts connected to the system.
Do you want to achieve a higher rate of fire and faster trigger response? Are you planning a power upgrade of your rifle? In that case, you need a MOSFET.
It targets the energy from the battery directly to the motor, bypassing the mechanical trigger contacts. As a result, you will gain a higher rate of fire of the rifle and a faster trigger response, and the contacts will be protected against burn out.
Do you care about realism? Would you like to increase the life of the gearbox? Does your rifle have such high rate of fire that you are not able to make a single shot? Active brake sorts things out.
In SEMI Mode, the brake does not allow for compressing the piston after a shot. The piston stops in front position which eliminates unnecessary stresses, increasing the service life of Gearbox and its parts. It is very important, especially with an AEG power upgrade.
After releasing the trigger, the rifle immediately stops shooting. Thus, you gain more realism and, additionally, you do not waste your precious ammunition.
A new MOSFET should never let you down on the battlefield. It is totally protected against overheating and short-circuiting of the electrical system. In case of the rifle becoming jammed, it protects the motor and the battery against any damage.
Protection against Over-Discharge of Battery (Battery Protection)
Modern LiPoly batteries are very sensitive to over-discharge. If you do not want to damage the battery and you care about its service life, this protection is indispensable. The microprocessor constantly monitors the battery voltage. When it drops down to a critical level, it will not permit firing.
Digital Interface (Debouncing)
This provides full compatibility with the micro-switches. It is fully resistant to contact bounce. You gain a bigger ROF, a faster trigger response and your MOSFET is less prone to heating.
3rd Generation MOSFET
The usage of modern transistors and microcontroller has enabled us to create the smallest and most reliable AEG Controller in the market.
Rate of Fire Control
It enables lossless reduction of the rifle's rate of fire. Adjustment is possible within the range of 30% up to 100%.
We know how vital the fast trigger response is during combat. Victory is often a matter of fractions of seconds. This is why we have developed the Smart Trigger function. This function enables you to achieve faster trigger response.
It works with the ROF Control system. During the first shot, the microprocessor sets ROF Control to 100%. After the first shot, it is switched to the previously programmed value, e.g. 30%. As a consequence, the first shot is fired with full rate of fire, and subsequent ones with a reduced ROF. The best results can be achieved by using a battery with higher voltage than a standard one. For example, if we use a 7.4V battery, we can change it to 11.1V. In this way, we achieve faster trigger response with the same rate of fire as with a standard battery.
3-rd Burst Mode
Burst mode enables you to make 3-shot series. In this way you can save ammunition and increase the realism. You can change AUTO mode to BURST mode or SEMI* mode to BURST mode.
If in SAFE/SEMI/BURST mode you release the trigger earlier, you can make one or two shots. The burst time is set in the menu with accuracy to 4ms. The processor actively compensates for the change in burst time with a decrease in the rate of fire due to battery discharging.
*SEMI to BURST in enhanced mode only
You can connect the system to a rifle in two ways. Depending on the selected method, you should set a proper operating mode: Plug&Play or Enhanced
Plug&Play: All you need to do is connect the system between the battery and the rifle.
Enhanced Mode: It requires modification of AEG installation. We connect trigger contacts to MERF. We can do it using the signal wire attached to the kit.
· The system operates properly within a wide range of voltages: 3.2 - 15V
· Compatible with the most powerful AEG replicas. It withstands continuous fire with the use of M170 spring and single shots with M210.
· Very simple assembly
· Comprehensive protections
· Very low current consumption in standby mode (0.15mA)
· Very low resistance of the whole system (2.4mΩ)
· Compatible with all types of GearBox
· 4 LED Display
· DEANS-T Connectors
Included in the kit:
· Single signal wire for trigger contacts
· Double signal wire for trigger contacts
· System programming button
1. Global shipping. (except for some countries and APO/FPO)
2. Process orders in time after verification.
3.We only ship to the confirmed order address. Your order address must match your shipping address and provide the full consignee name and contact phone number
4. Business hours are provided by the operator, except weekends and holidays. Shipping time may vary, especially during holidays.
5. If you have not received your shipment within 60 days after payment, please contact us. We will track the shipment and reply as soon as possible and reply.
6. Due to different inventory status and time, we will choose to ship your items from our first warehouse for quick delivery.
1.All our products must be checked one by one to ensure quality
2.100% Brand New and high quality
3. Quality issues:
1) If you have any quality problems, please provide us with detailed information within 7 days.
2) The buyer should check the package after receiving the goods. If the packaging is damaged during transportation, please refuse to sign and contact us in time.
4. Chromatic aberration problem: Due to the color reflection of the display, light, background, etc.
5. Size issues: Due to differences in measurement methods. The size data on the details page is for reference only.
6. If the problem is caused by you, the buyer should be responsible for the fee of returning the product.
We will confirm the problem and then provide you with a satisfactory solution.
1. If you are satisfied with our products and services, please leave your positive feedback and evaluate your order for 5 stars and 5 stars.
2. If you are not satisfied with our products, please contact us before leaving neutral (3 stars) or negative (1-2 stars) feedback. We guarantee that we will solve any problem for you 100%.
3. Please email us before leaving negative feedback or open any dispute on the website.
Communication is the best way to solve the problem.
Brand Name: SINAIRSOFT
Model Number: MERF32