6P1 stereo power amplifier board 3W+3W
High quality epoxy fiberglass board, thickness 2mm
Size: 185 × 57mm. Classic line.
The filament is AC powered, all ground wires are grounded at one point, and the hum is small.
The finished board can be connected to the power transformer, output transformer and speaker to work.
AC input high voltage: 230V ~ 0 ~ 230V 100mA, three sets of filament input voltage 6.3V, 6N1 0.6A, 6P1 1A.
Due to different production batches, the colors of the boards are different and are not selected. When the component parameters on the board are different from the schematic, the component parameters on the board shall prevail!
If your power transformer is 230V high voltage of two lead wires, it is bridge rectified (four diodes). Two 1N4007 diode positions have been reserved on the board for convenient and flexible use, as shown in the figure below.
1 x amplifier board
3 x tubes
Maximum Power Per Channel: 4W
Model Number: Tube amplifier
Channels: 2 (2.0)
Type: Home Amplifier