16S 35A PCM/PCB/BMS for 48V LiFePO4 Battery Pack for Electric Bicycle
Product Description :
16S 35A PCM/PCB/BMS for 48V LiFePO4 Battery Pack for Electric Bicycle and Scooter and Tools
Both charge and discharge current are 35A constant.
the peak current can be 135A.
Model: DG16S35A(for 3.2V rated Lifepo4 battery,
If your battery is 3.7V LiPO battery,please leave message to us.We can adjust the parameters)
Constant discharge current: 35A
Constant charge current: 35A
Charge wire and discharge wire share the same one.
Separate port is available, too.
4.Technical parameter(Lifepo4 battery)
|
Content |
Spec |
Unit |
Remarks |
Discharge |
constant discharge current |
35 |
A |
|
peak discharge current |
135 |
A |
|
|
charge |
charge voltage |
57.6 |
V |
|
charge current |
35(MAX) |
A |
|
|
Over charge protection |
over charge volt |
3.9±0.05 |
V |
|
over charge volt protect delay |
0.5 |
S |
|
|
Over charge volt release |
3.8±0.05 |
V |
|
|
Power balancing
|
Power balance volt |
3.6 |
V |
|
balance release volt |
3.6 |
V |
|
|
balance current |
35 |
mA |
|
|
Over discharge protection |
Over discharge detect volt |
2.0±0.05 |
V |
|
Over discharge detect delay |
0.5 |
S |
|
|
Over discharge volt release |
2.3±0.1 |
V |
|
|
Over current protection |
Over current detect volt |
100 |
mV |
|
Over current detect delay |
9 |
MS |
|
|
Over current protection |
135 |
A |
|
|
Over current protect release |
disconnect load |
|
|
|
Short circuit protection |
Short circuit protection |
External load short circuit |
|
|
Short circuit detect delay |
250 |
uS |
|
|
Short circuit detect release |
Disconnect load |
|
|
|
Temperature protection |
Temp protection |
none |
℃ |
Can be customized |
resistance |
Main circuit resistor |
≤10 |
mΩ |
|
Self- consumption |
Working current |
≤50 |
uA |
|
Sleepy current(when battery is over discharged ) |
≤12 |
uA |
|
|
Working temp
|
temp range |
-30/+80 |
℃ |
|
5. Wiring diagram
6. Factory photo
We can customize any PCB from 2S to 24S lithium batteries with different current.
1. Overview
DG16S35A PCB is used for 16series battery pack. We can design it for various lithium batteries like LiFepo4, LiMn2O4, and Li-polymer etc.
The main functions are: over charge protection, over discharge protection, over current protection, short-circuit protection, temperature protection etc.
2. Advantage
◆Use top quality (A-level) protective integrated circuit IC, from the solution of Seiko of Japan.
◆Strong load ability, constant discharge current 35A, use high voltage resistance, low inner
resistance power Mosfet. The heat sink will greatly help cooling.
◆IC itself has power balancing function. The circuit is simple and reliable.
◆Typical voltage detection for each cell. So each battery will be prevented over charged or over discharged. Over current and short circuit protection function is very reliable.Long time short circuit of the load won’t affect the PCB and the battery.Temperature protection during charging and discharging.
◆Extreme low power consumption. The consumption of the whole device is less than 50uA.
◆PCB use high anti-corrosion, high water resistance, high impedance ESD conformal Coating
3. Product photo
Accessory Type: Battery Accessories
Brand Name: QNBBM
Model Number: DG16S35A
Application: LIFEPO4 battery 3.2V rated
battery series: 16S
over charge protection: yes
short circuit protection: yes
over discharge voltage: yes
with heat sink: yes
with temperature monitor: yes
charge port and discharge port: share the same one
constant charge current: 35A
peak discharge current : 130A