Deligreen 16S 48V 80A 100A 120A 200A 250A PCM/PCB/BMS for 3.2V LiFePO4 battery pack DIY 18650 Lithion with Balance function
80% buyers also order balancer
Model: DG16S 80A 100A 120A 150A 200A 250A for 3.2V rated LiFePO4 battery
We can customize any PCB from 2S to 24S lithium batteries with different current.
Welcome retail and wholesale both. More discount for volume order!
DG 16S 80A 100A 120A 150A 200A 250A PCB is used for 16series battery pack.
We can design it for various lithium batteries like LiFepo4, LiMn2O4, and Li-polymer etc.
The main functions are: over charge protection, over discharge protection, over current protection, short-circuit protection,
temperature protection etc.
2 Custmers' feedback
4.Technical parameter（The following is an example for 3.2V rated LiFePO battery.
If your battery is 3.7V rated LiNCM, we will set the parameters for LiNCM batteries）
|Discharge||constant discharge current||80||100||120||150||200||250||A|
|peak discharge current||250±50||300±50||400±100||500±100||600±100||600±100||A|
|Over current protection||250±50||300±50||400±100||500±100||600±100||600±100||A|
|charge||charge voltage||Series No.*3.65||V|
|Over charge protection||over charge volt||3.75±0.05||V|
|over charge volt protect delay||1||S|
|Over charge volt release||3.55±0.05||V|
|Power balancing||Power balance volt||3.5||V|
|Balance release volt||3.5||V|
|Over discharge protection||Over discharge detect volt||2.2±0.05||V|
|Over discharge detect delay||1||S|
|Over discharge volt release||2.7±0.05||V|
|Over current protection||Over current detect delay||1||MS|
|Over current protect release||Off-load|
|Short circuit protection||Short circuit protection||External load short circuit|
|Short circuit detect delay||250||uS|
|Short circuit detect release||Off-load|
|Temperature protection||Temp protection||none||℃||Can be customized|
|resistance||Main circuit resistor||≤20||mΩ|
|Sleepy current(when battery is over discharged )||≤20||uA|
|Working temp||temp range||-40~80||℃|
5. Product Photo
6. Wiring instruction
1) Which current of the PCB should i choose?
Take 13S 48V pack as an example: Which PCB you should choose depends on the power of your motor or the current limitation of your controller. Below 350W ,you can choose 16A.Below 500W, you can choose 18A, Below 800W, you can choose 35A,Below 1KW, you can choose 60A. Above 1200W, the same. If you are not sure, please contact us freely.
2) Can I use bigger size of PCB than it should?
Suppose you need 60A PCB but you chose 80A, that is OK.
80A allows higher current.Nothing bad but a bit higher price.
But if you choose 50A, sorry it is too small. So you can choose higher spec but can’t choose lower one than it should have been.
3) What kind of charger should i choose?
Lithium battery must be charged by lithium battery charger. You can’t charge it with a lead acid battery charger. The lead acid battery charger might damage MOS pipe of the PCB.
4) If i have PCB, do i need any balancers?
Yes if you can add QNBBM balancers, that would be perfect.
The Main function of PCB is to prevent batteries from over charged or over discharged,over heated etc.
All the PCB /BMS in the world balance performance is not satisfactory.
With balancers added, the batteries lifespan will be longer and the capacity will be fully used.
5) How to judge if my PCB is broken or not ?
If you’d like to judge if the PCB is fine or not, please use a multi-meter and see if the voltage of each cell is close to each other or not.when the volt difference is 1V, the battery will have such performance:driving distance is short, cut off when started, charging time is very short.under such situation , some battery is defective. When the PCB is broken, the battery can’t be discharged when you measured the battery volt is normal.
8. About Us
9 Why choose us
Accessory Type: Battery Accessories
Model Number: DG16S-120A150A
Application: 3.7V LiNCM/3.2V LiFePO4
battery series: 16S
over charge protection: yes
short circuit protection: yes
over discharge voltage: yes
with heat sink: yes
with temperature monitor: No
charge port and discharge port: common port
constant charge current: 80A/100A/120A/150A/200A/250A
peak discharge current: Please check detail
Delivery time: 1 business day